# Using Paveway II Bombs (GBU-10/12/16) with the ATFLIR With the **ATFLIR pod**, the F/A-18C can independently find, designate, and guide laser-guided bombs with precision. Here’s how to use the Paveway II series step-by-step in DCS. --- ## ✅ Loadout Prep - Equip the desired LGB(s) and the **AN/ASQ-228 ATFLIR pod** - Ensure your **laser code** (default: 1688) matches what’s set on the bomb(s) > You can set laser codes in the **rearming menu** or use the **Ground Crew > Rearm&Refuel > Laser Code** option in the comms menu. --- ## 🧰 Cockpit Setup 1. **Master Arm: ON** 2. **A/G Master Mode** 3. **FLIR: ON** - Select FLIR page on the DDI - Ensure ATFLIR is warmed up and functioning 4. **Laser: ARM** - On the FLIR page, box **LTD/R** (arms the laser designator) - Box **TRIG** to enable **manual lasing** (if wanted) --- ## 🖥️ FLIR Targeting 1. Use the **Sensor Control Switch (SCS)** to give the FLIR page TDC priority. 2. Slew the targeting pod onto the target using the TDC. 3. Press **TDC depress** to designate the target. 4. Pod should enter **AUTO (point track)** if on a valid target. --- ## 🎯 Manual vs. Auto Lasing

Method	Description
Manual Lasing	TRIG boxed → pilot must hold trigger (second detent) to fire laser
Auto Lasing	TRIG unboxed → aircraft fires laser automatically ~10 sec before impact

For most cases, **auto lasing** is safer and reduces pilot workload. Use **manual lasing** when timing is critical or when buddy lasing. --- ## 🚀 Bomb Release 1. Switch to **AUTO release mode by unboxing TRIG** (recommended). 2. Fly the steering line until the **release cue** appears. 3. Weapon releases when you hold the pickle button over the drop line. 4. Maintain **line of sight** to the target until impact. --- ## ✅ Successful Hit Checklist - [ ] [ ] LTD/R boxed - [ ] [ ] TRIG boxed (if using manual lasing) - [ ] [ ] Laser code matches bomb - [ ] [ ] TGT designated in FLIR - [ ] [ ] Laser is fired on time - [ ] [ ] Line of sight is maintained until impact --- ## 🧪 Tips & Notes - Stay above **6,000 ft AGL** for safe lasing distance. - Lase **8–10 seconds before impact** in manual mode. - Use **NARROW FOV** and **Zoom Level 2** for precision. - Switch to **IR mode** at night or in poor lighting.